Presonus StudioLive Remote Bedienungsanleitung PDF herunterladen (Seite 51)

Addendum for

StudioLive Mixers

OverviewUniversal

Control and

VSL

QMixTroubleshooting

StudioLive Remote 3

StudioLive

Remote

Settings Page 3.7

Talkback Bus Assignments Engages/Disengages Talkback Assignments.

Use these switches to remotely engage/disengage the

Talkback bus assignments on your StudioLive mixer.

Link Channel Faders Links Channel Faders when Channels are Stereo Linked.

When Link Channel Faders is enabled, stereo-linked

channels will no longer have individual control over

each fader in SL Remote or VSL. This allows you to

control the volume of a stereo channel pair by moving

either channel’s fader.

Default to Fader Locate Activates Fader Locate on StudioLive when Fader is Moved Remotely.

With the Default to Fader Locate preference enabled,

Fader Locate will automatically engage when a fader

is moved remotely in VSL or StudioLive Remote. This

preference allows you to quickly sync your StudioLive

when you return to the board.

Power User Tip: If you are remotely controlling the faders on your StudioLive, it is highly

recommended that you enable this preference. When Fader Locate Mode is activated,

the faders on your StudioLive will not be active. By allowing this mode to engage

automatically, you can avoid accidental volume jumps should you forget that a fader

was adjusted up or down in VSL or SL Remote when you go back to your StudioLive.

Channel Naming Creates Custom Names for Channels, Auxes, and Su/jointfilesconvert/1452990/bgroups.

To create a custom name for any channel, aux, or

su/jointfilesconvert/1452990/bgroup in your mix, simply tap on the text ﬁeld next

to it. This will launch the iPad keyboard. After you have

entered the new name, tap the Done button. The

channels’ default name will be replaced with its new

custom name in SL Remote, VSL, and QMix.

Note: Channel Naming can be disabled in

Universal Control. If you are unable to change

channel names from QMix, verify your device’s

permissions in the Setup tab in Universal

Control. See Section 2.5.6 for details.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Keine Kommentare

Presonus StudioLive Remote Bedienungsanleitung Seite 51